Bung King Old Store: New Products - Handlebar Bungs

Handlebar Riser Lift Kit 2022 - current Nightster

Wed, 24 Jan 2024 13:49:59 +0000

These spacers allow the ability to rise your bars 1-1/2" from their current location. These spacers and longer bolts can be added without having to rewire, and most OEM cables can take the extra 1.5" so the install is usually only a few minutes and there is not usually any extra cost for cables..

Price: $21.50

1/2" x 13 Stainless Stepped Handlebar Bung

Thu, 15 Dec 2016 16:20:42 +0000

These are one of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same size used in most handlebar mounting. The stepped down section is 3/4" so it will slip into 1" x .120 wall tube. The larger diameter is 1" to meet up with th..

Price: $7.50

One Piece Lower Handlebar Riser

Tue, 05 Aug 2014 08:31:31 +0000

These are our one piece lower risers. They work with the stock upper riser clamp used on most Harley models because they work with the stock upper clamp, tachs and speedo. Mounting is simple with the use of the factory speedo or tach brackets. Multiple heights are available, as well as the opti..

Price: $180.00

1/2" x 20 Stainless Weld in Riser Spuds

Tue, 05 Aug 2014 08:31:18 +0000

Stainless Weld In riser Spuds

These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size fo..

Price: $12.75

1/2" x 13 Stepped Handlebar Bung

Tue, 05 Aug 2014 08:31:15 +0000

These are two of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same size used in most handlebar mounting. You can choose between a stepped down section that is 3/4" so it will slip into 1" x .120 wall tube or a stepped down section..

Price: $7.50

Wide Flange 1/2 x 20 Threaded Stepped Handlebar Bung

Tue, 05 Aug 2014 08:31:15 +0000

These are one of our larger versions of our weld in stepped or tophat style bungs. These ones are drilled and tapped through for a 1/2" x 20 ( fine thread) bolt the same size used in most handlebar mounting. The stepped down section is so it will slip into 1" or 1 1/4" tube with a .120" wall th..

Price: $9.75

Stainless Coped Weld On Riser Spuds

Tue, 05 Aug 2014 08:31:14 +0000

Stainless Weld On Coped Riser Spuds

These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set of bars using the coped part of the bung. They are thread..

Price: $9.00

Wide Flange 1/2 x 13 Threaded Stepped Handlebar bung

Tue, 05 Aug 2014 08:31:09 +0000

These are one of our larger versions of our weld in stepped or tophat style bungs. These ones are drilled and tapped through for a 1/2" x 13 bolt the same size used in most handlebar mounting. The stepped down section is so it will slip into 1" or 1 1/4" tube with a .120" wall thickness. The fl..

Price: $9.75

Handlebar / T-Bar Lift Kit

Tue, 05 Aug 2014 08:31:04 +0000

This product was originally made for those of you who purchased a set of t-bars but after a time wished you had gotten a little taller ones. These spacers allow the ability to rise your bars 1.5" from their current location. Most bars with internal wiring already installed can be lifted without..

Price: $18.50

Weld On Coped Riser Spuds

Tue, 05 Aug 2014 08:30:58 +0000

Weld On Coped Riser Spuds

These bungs are used to take place of a standard bolt on riser clamp. They are ment to be welded to your favorite set of bars using the coped section of the bung to fit around the correct tubing size. They are threaded to accept..

Price: $7.00