These are one of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same size used in most handlebar mounting.  The stepped down section is 3/4" so it will slip into 1" x .120 wall tube.  The larger diameter is 1" to meet up with th..

Price: $7.50

Stainless Stepped Blind Tank Bungs

These stepped, stainless steel, blind threaded bungs (some call them top hat bungs) are great for use in gas tanks, oil tanks or any other stainless steel fluid container.  They have a step machined in them to keep all of them mounted at the same ..

Price: $4.95

These weld on threaded bullet bungs are made of solid 304 stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end. 

• 1.5" Overall Length
• 3/4" Diamete..

  Price: $4.75

  ]]>

  These weld on threaded bullet bungs are made of solid 304 stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end. 

  • 1.5" Overall Length
  • 3/4" Diamete..

    Price: $4.75

    ]]> These weld on threaded bullet bungs are made of solid 304 stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end. 
    • 1.5" Overall Length
    • 3/4" Diamete..]]> https://big-designs.mybigcommerce.com/1-stainless-threaded-bullet/ Sun, 11 Jan 2015 14:11:57 +0000 https://big-designs.mybigcommerce.com/1-stainless-threaded-bullet/

      These weld on threaded bullet bungs are made of solid 304 stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end. 

      • 1" Overall Length
      • 3/4" Diameter<..

        Price: $4.50

        ]]>

        These weld on threaded bullet bungs are made of solid 304 stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end. 

        • 1" Overall Length
        • 3/4" Diameter<..

          Price: $4.50

          ]]> These weld on threaded bullet bungs are made of solid 304 stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end. 
          • 1" Overall Length
          • 3/4" Diameter<..]]> https://big-designs.mybigcommerce.com/1-2-x-20-stainless-weld-in-riser-spuds/ Tue, 05 Aug 2014 08:31:18 +0000 https://big-designs.mybigcommerce.com/1-2-x-20-stainless-weld-in-riser-spuds/

            Stainless Weld In riser Spuds

            These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size fo..

            Price: $12.75

            ]]>

            Stainless Weld In riser Spuds

            These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size fo..

            Price: $12.75

            ]]> Stainless Weld In riser Spuds

            These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size fo..]]> https://big-designs.mybigcommerce.com/5-16-x-18-stainless-threaded-bung/ Tue, 05 Aug 2014 08:31:14 +0000 https://big-designs.mybigcommerce.com/5-16-x-18-stainless-threaded-bung/

            These weld in bungs are made of solid Stainless round stock and drilled and threaded to 5/16 X 18  thread.  The .75" length stainless bungs are tapped through and the longer 1.25" ones are tapped blind. Great for all your fabrication mounting needs.

            Price: $4.00
            ]]>

            These weld in bungs are made of solid Stainless round stock and drilled and threaded to 5/16 X 18  thread.  The .75" length stainless bungs are tapped through and the longer 1.25" ones are tapped blind. Great for all your fabrication mounting needs.

            Price: $4.00
            ]]>These weld in bungs are made of solid Stainless round stock and drilled and threaded to 5/16 X 18  thread.  The .75" length stainless bungs are tapped through and the longer 1.25" ones are tapped blind. Great for all your fabrication mounting needs.
            https://big-designs.mybigcommerce.com/stainless-coped-weld-on-riser-spuds/ Tue, 05 Aug 2014 08:31:14 +0000 https://big-designs.mybigcommerce.com/stainless-coped-weld-on-riser-spuds/

            Stainless Weld On Coped Riser Spuds

            These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set of bars using the coped part of the bung. They are thread..

            Price: $9.00

            ]]>

            Stainless Weld On Coped Riser Spuds

            These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set of bars using the coped part of the bung. They are thread..

            Price: $9.00

            ]]> Stainless Weld On Coped Riser Spuds

            These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set of bars using the coped part of the bung. They are thread..]]> https://big-designs.mybigcommerce.com/1-4-x-20-stainless-threaded-bung/ Tue, 05 Aug 2014 08:31:08 +0000 https://big-designs.mybigcommerce.com/1-4-x-20-stainless-threaded-bung/

            These weld in threaded bungs are made from round5/8" solid Stainless steel bar stock they are drilled and threaded for 1/4" x 20 thread. Bungs come in a few different length and diameter options depending on thread size. The .75" length are tapped through and the 1.25" length ones are tapped bl..

            Price: $4.00

            ]]>

            These weld in threaded bungs are made from round5/8" solid Stainless steel bar stock they are drilled and threaded for 1/4" x 20 thread. Bungs come in a few different length and diameter options depending on thread size. The .75" length are tapped through and the 1.25" length ones are tapped bl..

            Price: $4.00

            ]]> These weld in threaded bungs are made from round5/8" solid Stainless steel bar stock they are drilled and threaded for 1/4" x 20 thread. Bungs come in a few different length and diameter options depending on thread size. The .75" length are tapped through and the 1.25" length ones are tapped bl..]]> https://big-designs.mybigcommerce.com/3-8-x-16-stainless-threaded-bung/ Tue, 05 Aug 2014 08:31:05 +0000 https://big-designs.mybigcommerce.com/3-8-x-16-stainless-threaded-bung/

            These weld in threaded bungs are made of solid 304 Stainless round stock and drilled and tapped to 3/8" x 16 thread. The .75" lengths are tapped through and the longer 1.25" ones are tapped blind. Great for all your fabrication mounting needs. 

            Price: $4.00
            ]]>

            These weld in threaded bungs are made of solid 304 Stainless round stock and drilled and tapped to 3/8" x 16 thread. The .75" lengths are tapped through and the longer 1.25" ones are tapped blind. Great for all your fabrication mounting needs. 

            Price: $4.00
            ]]>These weld in threaded bungs are made of solid 304 Stainless round stock and drilled and tapped to 3/8" x 16 thread. The .75" lengths are tapped through and the longer 1.25" ones are tapped blind. Great for all your fabrication mounting needs.